The Auray WSW-007MKII Custom Windbuster is a slip-on fuzzy windscreen made for shotgun microphones used in outdoor video, interviews, field recording, film production, and location audio. It fits microphones measuring up to 0.866 inch / 22 mm in diameter and 7 inches / 17.8 cm in length.

The dual-layer construction combines a gray faux-fur outer layer with an acoustic-cloth inner lining. These layers work together to diffuse moving air, reduce unwanted broadband wind noise, and control vocal plosives while limiting high-frequency loss and avoiding excessive sound muffling.

• Effective Wind-Noise Control: Provides approximately 30 to 40 dB of wind-noise reduction, with maximum attenuation reaching 40 dB.
• Designed for Outdoor Recording: Performs best in light to moderate breezes ranging from approximately 4 to 17 mph.
• Slip-On Installation: Slides over an existing foam microphone windscreen measuring up to 5 cm thick for convenient setup without removing the original foam protection.
• Microphone Protection: Helps shield the microphone element from moisture, dirt, air bursts, and environmental debris during location recording.
• Broad Compatibility: Fits the Rode VideoMic with Lyre Suspension, Rode VideoMic, Rode NTG-2, Sennheiser ME66, Audio-Technica AT-897, and similarly sized shotgun microphones.
• Product Length: Measures 7.5 inches / 19 cm from end to end.